Account Navigation

Account Navigation

Currency - All prices are in AUD

Currency - All prices are in AUD
 Loading... Please wait...
http://usedchiropractictable.com/

Replacement Spinalator Rollers - Manual Crank Roller Elevation Table ONLY

$349.99

Replacement Spinalator Rollers - Manual Crank Roller Elevation Table ONLY

$349.99
SKU:
RSMR
Condition:
New
Weight:
7.00 LBS
Availability:
Instock for Quick ship
Shipping:
Calculated at checkout
Quantity:
Share

Product Description

Spinalator IST Table Roller Kit

- for Manual Crank Roller Elevation Table ONLY 

- Wagon Wheel Spinalator Table Rollers


 These Replacement Rollers are for Spinalator Table with Manual Roller Height Elevation

 New Rollers are Black, Higher Density Foam!

The Spinalator Roller Kit  Includes

 High Density Rollers - Qty 3

  New Style steel one piece bearing- Qty 3

Adapter Threaded rods   Qty 6


Old Style Spinalator IST Table Rollers comes with Set of three High Density Rollers, Steel bearings, & Adapter Threaded Rods. These replacement Spinalator rollers will fit all Spinalator IST Tables with Manual or Wagon Wheel Type elevation roller mounting system ( shown in pictures ). You MUST buy this style Roller update kit for the OLDER Manual Roller Elevation Spinalator IST Table or Spinalator Wagon Wheel Table.

      
 
Replacement Spinalator Table Rollers Instructions with Manual Elevation 
  1. Remove top from Spinalator by unclasping end brackets.
  2. Make sure hands are clear of any moving parts and turn table timer on. Elevate Roller to top height
  3. Turn Roller rotation switch OFF, with one roller centered to the top of the triangle assembly.
  4. UNPLUG TABLE -  Failure to do this could cause bodily injury or tear up your new Spinalator rollers! This will also keep you from getting shocked if you happen to touch a exposed wire.
  5. Loosen Set screw from Roller and remove old Spinalator Roller. Install new Spinalator roller, New style roller will have a easy one piece bearing. Screw In Threaded adapter rod into bearing until it is flush on both sides then tighten down Set Screw.
  6. Ensure Hands, tools, and anything else is clear of rollers then plug up table. Turn Spinalator rotation switch on and cycle roller to next top height and shut off rotation switch again.
  7. UNPLUG TABLE - Failure to do this could cause bodily injury or tear up your new Spinalator rollers! This will also keep you from getting shocked if you happen to touch a exposed wire.
  8. Loosen Set screw from Roller and remove old Spinalator Roller. Install new Spinalator roller, New style roller will have a easy one piece bearing. Screw In Threaded adapter rod into bearing until it is flush on both sides then tighten down Set Screw.
  9. Ensure Hands, tools, and anything else is clear of rollers then plug up table. Turn Spinalator rotation switch on and cycle roller to next top height and shut off rotation switch again.
  10. Final Roller -UNPLUG TABLE - Loosen Set screw from Roller and remove old Spinalator Roller. Install new Spinalator roller, New style roller will have a easy one piece bearing. Screw In Threaded adapter rod into bearing until it is flush on both sides then tighten down Set Screw.
  11. Ensure Hands, tools, and anything else is clear of rollers then plug up table. Turn Spinalator rotation switch on and cycle rollers for final test.
  12. Install Top, make sure Top opening is facing the right direction on table. Fasten both End latch's.

  Check Chain Tension on Spinalator Roller rotation motor chain while top is removed. The Spinalator Roller tension should be like a bicycle chain; tight but not over tightened, to stretch the chain! Lube Chain with a Teflon lube. WD-40 will stop a squeak but is water based and will evaporate quickly! If you have movement in the roller after tightening chain, check Spinalator sprocket for a broken weld....
 
Spinalator Table Old Style , Wagon Wheel Spinalator Table ,replacement Spinalator Roller table, Replacement Spinalator Rollers for sale, Spinalator Roller replacement , Spinalator Roller Table Chiropractic ,Spinalator table roller for sale, Spinalator roller table part, spinalator table roller part, Spinalator Rollers, Replacement Spinalator Rollers,Spinalator ist Roller,Replacement Spinalator table  Roller ,spinalator table roller,spinalator roller table part,spinalator table rollers

Product Reviews

Find Similar Products by Category